Skip to main content
All CollectionsRecallsAutomated Recalls
How to create a new recall automation workflow
How to create a new recall automation workflow

How to set up recall workflows to run automatically.

Hebe Neate-Clegg avatar
Written by Hebe Neate-Clegg
Updated over a week ago

How do I create a new recall automation workflow?

πŸ“ Please note: This article is a step-by-step guide on creating a recall workflow. First, you will need to enable recall automation - read our detailed guide on doing so here.

To send recalls manually, you will need to:

  • Ensure recall automation is turned on - we recommend waiting one week after turning on automation before beginning to set up automation workflows, to allow overdue appointments to catch-up.

  • Make sure your appointment reasons are set up correctly.

  • Ensure patient details are being recorded accurately by reception staff or through Dentally Portal.

  • Set up your 'Recalls' report by applying the filters you need.

  • Ensure practitioners are setting a recall interval for each patient at the end of every appointment (by updating their recall intervals in the patient record or when charting a course of treatment).

πŸ’‘ Top tip: Encourage your patients to pre-book their next routine appointment following completion of treatment, to minimise the requirement for recalls and reduce recall communication costs.

Then you'll be ready to start creating recall automation workflows.

To create a new automation workflow:

  • In Dentally, go to 'Reports' and click on the 'Recalls' report.

  • In the top right corner, click on the 'Workflows' button.

  • Here you will see all your current workflows, and you can manage all existing recall workflows.

  • To create a new one, click '+ New workflow' in the top right corner.

  • Name your new workflow in the field on the left.

  • First you will need to set up the workflow details. Complete the following fields:

    • Location - Set the site location (for multi-site practices only).

    • Recall Type - Choose from dentist, hygienist or combined.

    • Payment Plan - Choose from your available payment plans.

    • Practitioner - Choose from your active practitioners.

    • Active? - This field cannot be edited until you have at least one stage in the workflow. Once you have added a stage, go back to edit this section and there will now be a dropdown.

  • When you have finished, click 'Save'. The details of the recall workflow will now be saved.

  • You will be able to see the workflow's 'Recall Creation', which is based on the timeframe you have set up in the recall settings. This is when a recall will be created for a patient, and all subsequent stages of the workflow will follow on from this point.

How do I add stages to a recall workflow?

Once you have created a workflow, you will need to fill in the details of the first stage - in order to be active, a workflow must have at least one stage. The number of patients that will be triggered by this stage is shown by the number and icon to the right of the stage.

  • Complete the following fields:

    • Interval - The amount of time between the 'Recall Creation' and the first action. You can choose from 'Same day as last action' up to '12 months since last action'.

    • Use Patients Recall Preference? - If you choose 'Yes', it will only send via the patient's recall method preference. If you choose 'No', it will send via your chosen communication method.

    • 1st Template - Select the type of communication and choose the template from your pre-made correspondence templates. This will be attempted first, and if it is not successful, 2nd template will be used.

    • 2nd Template - Select the type of communication and choose the template from your pre-made correspondence templates. This will be attempted if 1st template has failed. If both templates fail for a patient, they will not receive that communication.

  • When you have finished, click 'Save'. This stage of the recall workflow will now be saved.

  • You will now see a summary of that stage, based on what you chose. It will note how and when the recall workflow is sending, as well as the number of patients included (which will be at 0 until the recall workflow is active). Here is an example:

  • To add another stage, click 'New Stage' and follow the steps above. Ensure you click 'Save' after each new stage you create.

  • To delete an existing stage in the workflow, click 'Edit' and then select 'Delete'.

  • When you have added all the stages you need, set the workflow to 'Active' by going back to the workflow details at the top, clicking 'Edit' and then selecting 'Yes' from the 'Active?' dropdown. All workflows will be set to inactive by default.

πŸ“ Please note: You can return to the workflows page at any point by clicking the 'Workflows' button in the top right corner, but any progress in your new workflow that hasn't been saved will be lost.

Our best practice setup is proven to boost recall effectiveness whilst saving you time across the practice! The templates we recommend should already be populated in Dentally for you (if you can't see them, reach out to Support). Our recommended recall workflow looks like this:

Stage

Use Patient's Recall Preference

1st Template

2nd Template

3rd Template

Same day as last action

No

SMS: Recall 1 - Dentist &/or Hygienist Due

Email: Recall 1 - Dentist &/or Hygienist Due

Letter: Recall 1 Dentist &/or Hygienist Due

4 weeks after last action

No

Email: Recall 1 - Dentist &/or Hygienist Due

SMS: Recall 1 - Dentsit &/or Hygienist Due

4 weeks after last action

No

Letter: Recall 2 - Dentist &/or Hygienist Overdue

SMS: Recall 2 - Dentsit &/or Hygienist Overdue

6 months after last action

No

Email: Recall 2 - Dentist &/or Hygienist Overdue

6 months after last action

No

SMS: Recall 2 - Dentist &/or Hygienist Overdue

Email: Recall 2 - Dentist &/or Hygienist Overdue

Letter: Recall 2 Dentist &/or Hygienist Overdue

12 months after last action

No

Email: Recall 3 - Dentist &/or Hygienist Very Overdue

Letter: Recall 3 Dentist &/or Hygienist Very Overdue

12 months after last action

No

Email: Recall 3 - Dentist &/or Hygienist Very Overdue

πŸ’‘ Top tip: Workflows can be set up individually for both dental and hygiene appointments, and you could even set up individual workflows for each of your providers or plans if you wished.

Did this answer your question?