Saving and grading an x-ray in EXpro
After capturing an image, EXAMINE Pro will prompt the user to save the x-ray upon exiting the acquisition screen. At this stage, you can assign:
User (who captured the image)
Grade (image quality for audit purposes)
Image Type (e.g., bitewing, periapical)
Use the drop-down menus to select the appropriate value for each field.
Adding dosage information
This same window also allows you to enter the radiation dosage for the x-ray.
If dosage details are not manually entered, EXAMINE Pro will apply the default values.
The software remembers the last-entered dosage settings, using them as the new default for future images.
💡Top Tip - This information can be included in reports and is important for compliance and clinical auditing.
Editing properties on an existing image
You can update grading, user, or dosage information on an x-ray that has already been saved:
Open EXAMINE pro form the Dentally bridge on the desired patient.
Locate the image thumbnail in the Image Library.
Right-click and select 'Image Properties'.
The properties window will open, allowing you to adjust the details as needed.
Troubleshooting Issues
User not available in the list
If the intended user is not listed, they may not yet be configured within EXAMINE Pro. Configure your users by following this guide here.
Grading options missing or incorrect
If the grading options are incomplete or incorrect, they may need to be configured within your EXpro settings. Follow our guide on how to do this here.