Skip to main content
All CollectionsDentally VisionFAQs
What are Dentally Vision's system requirements?
What are Dentally Vision's system requirements?

🇬🇧🇦🇺🇨🇦🇮🇪 UK, AU, CA, UK, ROI - For optimal usage, make sure your equipment meets the following System Requirements.

Amber Morris avatar
Written by Amber Morris
Updated this week

Broadband speed / bandwidth

There are two recommended broadband performance requirements which a practice needs to meet in order to achieve a good experience using Dentally Vision:

  • A stable and reliable broadband connection (Fixed line or Wireless 4G):

    • Consistently achieving speeds of 24Mbps download / 4Mbps upload.

  • Where there is the potential for more than one computer simultaneously using Dentally Vision:

    • At least 5Mbps download and 1Mbps upload of dedicated bandwidth for 2D image capture per computer.

    • At least 10Mbps download and upload of dedicated bandwidth for 3D image capture per computer.

For example

  • A practice’s broadband connection for a single computer using Dentally Vision 2D should meet the consistent bandwidth requirement of 24Mbps down / 4Mbps up.

  • A practice’s broadband connection which has the potential of simultaneously using Dentally Vision 2D on six computers at one time requires at least 30Mbps down / 6Mbps up of dedicated bandwidth.

  • A practice’s broadband connection which has the potential of simultaneously using Dentally Vision 3D on five computers requires bandwidth of at least 50Mbps down / 50Mbps up of dedicated bandwidth.

Browser

  • Latest version of Chrome for PC and Mac

Operating System

  • Microsoft Windows 10 or later

  • MacOS 10.15 (Catalina) or later

  • Most recent macOS Ventura

  • iOS 13 or later

Note: The operating system must be updated with the latest versions of any system patches and security updates.

Anti-Virus Software

  • Anti-virus software patched to latest version and virus definitions.

Display

  • 21.5-inch (measured diagonally) monitor

  • 1920 x 1080 resolution

Note: For best results, always use the native screen resolution of a monitor.

3D System Requirements

  • Graphics card with 2GB of video ram (not shared) for small/medium FOV.

  • Graphics card with 4GB of video ram (not shared) for large FOV.

  • Preferred discrete/dedicated graphics card (not integrated onto motherboard) and is required for large FOV.

  • Current (last year/two) of integrated (on motherboard) graphics card can work for small/medium FOV with minimum 2GB available for Video Ram. (volume rendering can be bit slow, but it is turned off by default)

  • Dicom volume compression/decompression preferred mid-range CPU (I5 or higher) and system Ram 8GB or more.

IMPORTANT INFORMATION - volume rendering can be slow, but it is turned off by default. Dicom volume compression/decompression preferred mid-range CPU (I5 or higher) and system ram 8GB or more.

Scanners

TWAIN drivers built on version 1.9 or later of the TWAIN standard. Notes:

  • All modes (such as native and buffered) are supported.

  • Single-image transfers and multiple-image transfers are supported.

  • Automatic document feeders (ADF) are not supported.

  • The TWAIN Direct standard (which is different from TWAIN) is not supported.


Have you downloaded the Complete Dentally Vision User Guide?

This full guide offers you information on everything from acquiring images, sharing images, editing images, and so much more. Save a copy of the guide to your PC so you always have it on hand! Grab your copy below 👇

Did this answer your question?